Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Richmond Homeowners
Windows and doors are the parts of a Richmond home that quietly cost you the most when they stop working right. A door that no longer seals, glass that fogs from the inside, or a slider that fights you every time is more than a nuisance; it shows up in your heating bill, your comfort, and the way the house feels on a foggy morning off the bay. The real problem most homeowners run into is coordination: one company sells the glass, another installs it, a third handles trim or permits, and nobody owns the finished result. We put all of that under one contractor, so the measure, the build, the install and the cleanup stay in one set of hands. Our technicians have up to 11 years of experience setting frames and hanging doors in the Bay Area’s housing stock, from older Craftsman homes to recent builds on steeper lots. We can often schedule same-day visits for customers who call in the morning, and the phone is staffed whenever you need it. Call (877) 367-8617 to set up a free, no-obligation estimate.
What Our Windows & Doors Service Includes
We handle the full range of window and door work, from a single replacement unit to a whole-house envelope job. Here’s how each piece fits together for a Richmond homeowner.
Window Installation
Window installation is the process of setting a new window into a rough opening or an existing frame, sealing it properly, and finishing the interior and exterior trim so it looks like it was always there. You need it for new construction, for a room addition, or when the old unit is too far gone to retrofit. Construction Richmond measures the opening, confirms the frame is square and sound, sets the unit with the right flashing and sealant, and finishes the trim so the result is weather-tight and clean from both sides. We pull permits when your city’s building department requires them and coordinate the inspection.
Door Installation
Door installation covers the entry, patio, and interior doors that take daily wear. You’ll want a fresh install when a frame has rotted, when a door sticks or drags because the opening shifted, or when you’re upgrading to a better security or entry door. We source entry doors from lines like Therma-Tru and set them plumb and square, so the door swings cleanly and the weatherstripping seals the full perimeter. Hinges, locksets, and threshold work are handled as part of the job.
Window Replacement
Window replacement swaps out an existing window for a new unit, either into the existing frame or by removing the whole window and rebuilding the opening. It’s the right call for glass that has clouded between the panes, frames that have warped or rotted, or windows that let in drafts and road noise. We offer both full-frame and insert replacements depending on the condition of your wall opening, and we help you weigh which one avoids unnecessary tear-out while still fixing the underlying problem.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced framing to hold up against flying debris and strong wind. They’re worth considering where wind, security, or noise are real concerns, and they also cut down outside sound and add a security layer that standard glass doesn’t. We source impact-rated lines like PGT and CGI, and we walk you through the ratings and how they’re tested so you can choose the right level for your goals without overpaying for a rating you don’t need.
Energy-Efficient Windows
Energy-efficient windows use low-E coatings, insulated glass, and better frame materials to reduce heat transfer. They’re the fix when your rooms run hot in the afternoon sun or cold on foggy mornings and your heating and cooling bills reflect it. We look at which walls face the sun in Richmond, and we recommend the glass and frame combination that actually fits your orientation rather than a one-size spec. The result is a quieter, more comfortable house and a more sensible energy bill.
Sliding & Patio Doors
Sliding and patio doors are the wide-glass openings that connect your living space to the yard or deck. You need a new one when a track has worn, the rollers have failed, or the unit is too drafty and heavy to open smoothly. We replace and install sliders and patio doors, including impact-rated sliding glass doors, working the track and threshold so the door glides without binding and drains away from the house. Custom and geometric windows round out the lineup when a standard-size unit won’t fit your design.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
The right product depends on the job, and we work with a wide range of manufacturers rather than a single exclusive line. For doors, we know Therma-Tru entry systems and how their frames and weatherstripping hold up in homes near the bay, and we can tell you where a worn threshold or hinge set shows up first. For glass and patio work, we service Mr-Glass and other sliders, and we know how their tracks and rollers tend to age. We also work with ViewLux lines and understand their glass and frame configurations, so a replacement unit fits the opening rather than fighting it.
Our value here is choice: you tell us what matters most – durability, energy performance, appearance, or budget – and we help you pick the manufacturer and tier that fits. We’re not locked into one brand’s catalog, so you’re never forced into a spec that doesn’t suit your house. Whether you have Mr-Glass, Therma-Tru, ViewLux, or any other make, we can help.
Signs You Need Windows & Doors Right Now
Windows and doors fail slowly, so it’s easy to live with a problem for a year without noticing. These are the signals worth acting on.
- Drafts and rising heating bills. If you feel air moving around a closed window or door frame, the seal or weatherstripping has failed and you’re paying to heat the outdoors. That’s the classic sign a replacement is due.
- Fog or condensation between the panes. Glass that clouds from the inside means the sealed unit has lost its gas fill and moisture is trapped between the layers. A window that fogs permanently has failed and won’t clear up on its own.
- Sticking, dragging, or hard-to-lock doors. A door that scrapes the floor or won’t latch is usually a sign the frame has settled, the hinges have worn, or the opening has shifted. Left alone, it gets worse and can become a security gap.
- Rotted frames or peeling trim. Soft wood around a window or door means water has been getting in. It spreads, so catching it early keeps the repair small.
- Outside noise and cold glass. If street noise or temperature passes right through your windows, you’re a good candidate for energy-efficient or impact glass, which quiets the house and keeps interior temperatures steadier.
Our Windows & Doors Process – Step by Step
We keep the process simple and transparent, so you know what happens at each stage.
- 1
Free on-site measure and walkthrough. We inspect each opening, check the frames and existing trim, and talk through your goals, budget, and any style or performance requirements. You get a written line-item quote before anything starts.
- 2
Product selection. We help you choose the manufacturer, glass type, and finish from a range of brands, matched to your house, your climate exposure, and your budget. You get real material options, not a single take-it-or-leave-it spec.
- 3
Permits and scheduling. When your city requires a permit for the work, we pull it and coordinate the inspection, then lock in the install dates. We plan around weather and access so the job moves without surprises.
- 4
Installation with flashing and sealing. Our technicians set each unit plumb and square, install flashing and sealant at the openings, and check operation, locks, and drainage before finishing trim. This is the step that decides whether the job stays weather-tight for years.
- 5
Final inspection and cleanup. We walk the finished work with you, confirm everything opens, closes, and seals as it should, and put the site back the way we found it. If any issue shows up later, you have a clear path to bring us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Richmond?
Window replacement in Richmond typically runs $4,500 – $15,000 depending on the number of units, the frame size, the glass type (standard versus impact-rated), and whether it’s a full-frame replacement or an insert into the existing opening. That’s an estimated range; the written estimate sets the final price. A few things move the number: the number of windows and their size, whether the openings need repair before install, and the product tier you pick. Energy-efficient and impact-rated glass cost more than standard units, but they also pay back on comfort, noise, and energy use.
The way to avoid overpaying is a written line-item quote that shows what’s included: removal, disposal, materials, flashing, trim, permits, and cleanup. Our estimates are free and itemized, with fixed pricing and no change-order surprises once the work is set. If your project runs into structural repair at the openings, we price that in before the job starts rather than mid-install. Call (877) 367-8617 to get an exact quote for your Richmond home.
Windows & Doors Near Richmond – Our Service Area
We work across Richmond and the surrounding Bay Area communities, including Tiburon, Corte Madera, San Rafael, Larkspur, Mill Valley, San Anselmo, and Novato, plus San Francisco and Daly City for larger projects. Response times depend on the job and the day, and we schedule so you know when to expect us. To see the full range of what we do under one roof, read more about Construction Richmond.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Richmond
Windows and doors service is the inspection, installation, and replacement of the openings in your home’s envelope, from a single unit to a whole house. It covers everything from measuring the opening and choosing the product to setting the frame, flashing and sealing it, and finishing the trim. In Richmond, it also includes impact-rated and energy-efficient options for homes that need more weather or sound protection. We handle all of it as one contractor, so you’re not coordinating a seller, an installer, and a trim carpenter separately.
Most single window or door replacements are a day’s work, and a whole-house project usually runs several days depending on how many openings and whether structural repair is needed. Timing also depends on product lead times and permit timelines from your city’s building department. We give you a schedule before work starts so you know what to expect, and we plan around weather and access. Call (877) 367-8617 to get a timeline for your specific project.
Window replacement in Richmond typically runs $4,500 – $15,000, depending on the number and size of windows, the glass type, and whether it’s a full-frame or insert replacement. Impact-rated or energy-efficient glass sits toward the higher end. The written, itemized estimate sets the final price, so there are no change-order surprises. Estimates are free, so call (877) 367-8617 for an exact quote.
Yes, we work with a wide range of window and door manufacturers, including Therma-Tru, Mr-Glass, and ViewLux, and we can source and install other makes as well. Our value is that you’re not locked into one exclusive catalog, so we match the product to your house and your goals. Whether you already own a specific brand or want to choose fresh, we can help. Call (877) 367-8617 to discuss your brand and product options.
Yes, same-day visits are often available when you call in the morning, depending on the job and our schedule. We answer the phone 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (877) 367-8617 for the soonest available visit.
Warranty coverage depends on the manufacturer and the product line you choose, and we walk you through the terms before you commit. Some lines carry strong warranties on glass and frames, and we help you compare them so you pick a product that backs its work. We also stand behind our installation work and will come back if something isn’t right. Call (877) 367-8617 to review warranty options for your project.
Clear the work area near each opening, move furniture and wall decor back a few feet, and remove curtains and blinds so the crew has clear access. Plan to be around for the walkthrough at the start and the final inspection at the end. Our technicians set up protection for floors and furnishings and clean up when the job is done. If your project needs a permit, we’ll handle that and let you know what to expect for the inspection.
Schedule Your Windows & Doors Service in Richmond Today
Whether it’s a single drafty window, a whole-house replacement, or impact-rated units for peace of mind, we can price it clearly and deliver it under one contractor. Our estimates are free and itemized, with fixed pricing and permits pulled when required. Call (877) 367-8617 to book your no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.