Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Tiburon
If you live on one of Tiburon’s hillside lots, you already know the driveway takes more abuse than any other hardscape on the property. Salt air rolls in off the bay, winter rain sheets down the slope, and the joints are usually the first thing to go. We work with Tiburon homeowners on pavers, concrete, asphalt, resurfacing, and repair, and we spec every job for the coast rather than for a fair-weather climate. Our technicians have up to 11 years of experience, and every job starts with a free written estimate. Call (877) 367-8617 to schedule yours. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Tiburon Homeowners Call Construction Richmond for Driveway & Pavers
What separates a driveway that lasts in Tiburon from one that doesn’t is rarely the slab itself. It’s the restraint, the fastening, and the joint. The marine fog belt and the salt-laden onshore air here corrode standard steel edge restraints and break down polymer-sand joints far faster than inland Marin, so a driveway installed to a fair-weather spec can show rust bleed and sand washout within a few seasons. We build to the coastal spec from the start: stainless or hot-dip galvanized restraints, marine-grade joint sand, proper under-drainage, and a sealed surface.
That’s the local knowledge you’re paying for, and it’s the reason homeowners on the Tiburon peninsula call us back for the next project. We work with Belgard, Unilock, Tremron, and Techo-Bloc so you have real material choices, not a single take-it-or-leave-it spec. Every quote is written line-item, the scope stays in writing, and the punch list gets walked before any inspection sign-off. If you’re comparing us to a cheaper bid, ask what restraint and joint material that bid includes. Call (877) 367-8617 for a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Tiburon
Paver Driveways
Pavers are the right call for most Tiburon hillside driveways because they flex with minor ground movement and individual units can be lifted and reset instead of tearing out a whole slab. We set them on a properly compacted, drained base with corrosion-resistant edge restraints, and we use marine-grade joint sand so the joints don’t wash out on the first heavy rain. Belgard and Techo-Bloc both give you a range of finishes that hold up to the salt air.

Concrete Driveways & Concrete Work
Concrete is a solid option on the flatter lots and for aprons, walkways, and patios that tie into the drive, but it has to be detailed for a coastal site. That means positive slope away from the house, real under-drainage rather than a thin gravel bed, and a sealed finish to slow the surface spalling that unsealed concrete shows under marine fog and moisture cycling. We pour and finish, and we tell you up front what the drainage has to do.

Asphalt Driveways & Resurfacing
Asphalt is the budget-friendly route for longer runs, and on a steep Tiburon lot the key is the base and the edge, not the top coat. We grade for drainage first, then pave or resurface over a base that can actually carry the water off the slope. A driveway that sheets water is a driveway that fails at the downhill edge within a few winters.

Driveway Repair & Replacement
When pavers have settled at the bottom of the slope or the concrete apron is cracked and heaving, the cause is almost always water plus a failed restraint. We diagnose the drainage before we quote the repair, because patching over a wet base just buys you another season. Sometimes a reset and reseal is enough; sometimes the base has to be rebuilt. Either way you get a written scope and a fixed price.
Need the full breakdown on any of these? Our Driveway & Pavers team can walk you through materials and staging for your lot.
Trusted Brands We Service in Tiburon
Material choice is yours to make, and we source from brands that stand behind their work. For pavers we work with Belgard, Unilock, Tremron, and Techo-Bloc, each with its own strength in color, texture, and durability against salt air. We don’t stock parts locally; we specify the product for your site and order it to the job. If you have a brand in mind from a neighbor’s driveway you liked, bring it up at the estimate and we’ll tell you honestly how it holds up on a coastal slope.
Common Driveway & Pavers Problems We See in Tiburon Homes
- Rust bleed and loose pavers. Standard steel edge restraints corrode fast in the salt-laden onshore air, staining the surface and letting pavers shift. The fix is stainless or hot-dip galvanized restraint, specified at install.
- Joint washout and weed growth. Polymer-sand joints and unsealed concrete break down under marine fog and moisture cycling, opening joints to weeds and letting water into the base.
- Heaving at the downhill edge. Winter rain concentrated on a steep slope overwhelms under-drainage, so water sheets across the drive and undermines the base, heaving concrete and settling pavers.
- Staging-driven shortcuts. On narrow single-lane access above downtown and in Belvedere, tight staging pushes crews toward rushed or undersized base prep that fails within a few seasons. Plan the staging before you plan the pour.
How a Typical Tiburon Driveway Job Goes
Most calls start the same way: a cracked, heaving apron, or pavers that have settled and washed out at the downhill edge while the rest of the driveway still looks fine. The usual cause is water. Winter rain concentrates on a steep slope, under-drainage is often poor, and edge restraints have corroded or lost their bedding, sometimes made worse by runoff from the lot above. A qualified local pro will pull the required permits, excavate and re-grade to a positive slope with proper drainage, and specify stainless or hot-dip galvanized edge restraints, marine-grade joint sand, and a sealed surface. The scope and any change order stay in writing, and the punch list is walked before inspection sign-off.
On the steep lots above downtown and in Belvedere, the harder problem is often access. Single-lane drives make material delivery and excavation staging as difficult to plan as the build itself, and hillside drainage from one lot can physically and legally affect the neighbor below. That’s why we look at the whole site, not just the square footage, before quoting.
See the difference
Before
After
Before
After
Before
AfterPricing for Driveway & Pavers in Tiburon, CA
Here are the typical estimated ranges for Tiburon. Final pricing is set per job by the written estimate, and ranges shift with slope, access, drainage work, and the restraint and joint spec you choose.
A coastal-spec job in Tiburon runs higher than the same square footage quoted inland, because the restraints, joint sand, sealing, and under-drainage that survive salt air and a slope cost more than the fair-weather version. That gap is exactly why the cheap spec costs more within a decade: a second tear-out in five years is more than the difference up front. Call (877) 367-8617 for an exact quote; estimates are free.
We Also Serve Cities Near Tiburon
We also work with homeowners in Tamalpais-Homestead Valley, Corte Madera, Mill Valley, and Larkspur. Each sits on the same marine fog belt, so the coastal-spec detailing matters just as much there. If your property straddles a Tiburon address and a neighboring town, mention it when you call and we’ll sort out the scope.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Tiburon
Water is pooling and moving at the low point, and the edge restraint has likely failed. Winter rain concentrates on the slope, under-drainage is often inadequate, and standard steel restraints corrode in the salt air, so the base at the downhill edge loses its bedding first. Call (877) 367-8617 to schedule a free estimate that includes a drainage look.
Yes, and it shows up at the joints and fastening before the slab. Salt-laden onshore air corrodes standard steel edge restraints and degrades polymer-sand joints faster than inland, causing rust bleed, loose pavers, and joint washout in just a few seasons. Coastal-spec materials solve most of it. Call (877) 367-8617 for a quote.
Because the parts that fail here cost more to do right: stainless or hot-dip galvanized restraints, marine-grade joint sand, real under-drainage on a slope, and a sealed surface. The up-front gap is smaller than a premature tear-out. Estimates are free; call (877) 367-8617.
Yes, but it has to be planned before the first delivery. We look at access, material drop points, and excavation staging up front so base prep isn’t rushed into too few hours. Call (877) 367-8617 and we’ll walk the constraints with you.
Usually yes, especially where grading, drainage, or retaining work is involved, and coastal review can add steps. We pull the permits and expect the work to pass inspection, with the punch list walked before sign-off. Confirm the requirements with the town, then call (877) 367-8617 for a free estimate.
Get Your Free Driveway & Pavers Estimate in Tiburon
Tiburon’s salt air and steep lots ask more of a driveway than a fair-weather install can give, and that’s the difference between a surface that looks good for a year and one that holds up. We build to the coastal spec: corrosion-resistant restraints, marine-grade joints, proper drainage, and a sealed finish, all in a written line-item estimate with no change orders unless you approve them. From the driveway to the roofline, one contractor can handle what your property needs. Call (877) 367-8617 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.