Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Corte Madera
If you live in Corte Madera and your property line needs a new fence, you already know the tricky part isn’t the wood or the vinyl. It’s the lot. Street parking is tight, driveways are short, and a shared boundary can sit a few inches from where anyone thinks it is. We handle fence installation in Corte Madera with those constraints built into the plan from the first estimate, not discovered on install day. Our technicians have up to 11 years of experience, and they know how to work a small bayside and hillside lot without turning your block into a staging yard. Call (877) 367-8617 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Corte Madera Homeowners Call Construction Richmond for Fence Installation
Corte Madera is small and built out. There’s no room for new subdivisions here, so the fencing work we see is almost always replacement or upgrade on 1940s to 1970s ranch and split-level homes, many of them mid-remodel. That means we’re usually working alongside a second-story addition, a new deck, or an ADU going up in the same backyard. Our strong local reputation in Corte Madera comes from being a good neighbor on a tight street as much as from setting a straight post.
Response time to Corte Madera is fast because the town sits right on the 101 corridor. We can get an estimator out to look at your lot, talk through material choices, and give you a written line-item quote. That quote is fixed, with no change orders, and estimates are always free. We’re licensed and insured.
The local knowledge matters most when your property sits near the water or up the slope. We know the difference a few hundred feet of elevation makes to what your fence project has to satisfy. Corte Madera homeowners call us because we ask about the lot before we quote the fence.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Corte Madera
We cover the full range of fencing here, and each material suits a different kind of Corte Madera lot. Here’s how the most common ones break down.
Wood Fence Installation in Corte Madera
Wood is still the default for most Corte Madera yards, especially the older homes where a cedar or redwood privacy run matches the original character. On a shared lot, wood also gives you flexibility on the boundary line and easy repair later. We schedule framing and post-setting around Marin’s wet winters, because digging in saturated clay is a bad start for any fence.

Chain Link Fence Installation in Corte Madera
Chain link is the practical choice for a side yard, a dog run, or a property edge where budget and durability matter more than looks. On hillside parcels where the grade drops fast, a chain link run handles slope better than rigid panel styles. It’s also the least disruptive option to install on a cramped lot with no staging room.

Vinyl Fence Installation in Corte Madera
Vinyl has become popular on the bayside flats, where salt air and damp winters wear on wood faster. A good vinyl privacy fence keeps its color and needs very little upkeep. We work with lines like Bufftech and ActiveYards so you get real material choices, not a single take-it-or-leave-it spec.

Aluminum Fence Installation in Corte Madera
Aluminum suits the homes where a low, open fence makes more sense than a solid wall – front yards, pool surrounds, and the kind of property where you want the view kept open. It holds up well to moisture and won’t rot. Lines like Ameristar and Jerith give you ornamental options that look sharp against a mid-century ranch.
Privacy Fence, Fence Repair, and Gates
Most Corte Madera privacy fence requests come from a backyard that overlooks a neighbor’s addition or a second-story window. We build to the height your setback and code review allow. For fences that are still sound but leaning or rotting at the base, fence repair is often cheaper than replacement, and we’ll tell you honestly which one your fence needs. Gates get matched to the fence line and hung to swing clean on a sloped grade.
Trusted Brands We Service in Corte Madera
We source fencing from brands with a track record, including Ameristar, Jerith, Bufftech, and ActiveYards, and we’re authorized to install and source products from more than 50 recognized national brands across every category we handle. That means you choose the brand and the material tier, and we handle the build. We don’t claim to stock parts locally – your materials come in matched to the job and the written spec, so the fence you approve is the fence you get. If a line isn’t right for your lot, we’ll say so and point you to one that is.
Common Fence Installation Problems We See in Corte Madera Homes
A lot of the trouble on a Corte Madera fence job starts before a single post goes in. These are the recurring issues.
- Flood-zone elevation missed on bayside lots. A fence on a low-lying parcel near the bay can fall under FEMA floodplain review, and skipping that check can trigger a stop-work order and a costly redesign. We confirm the flood status before quoting.
- Posts set without a boundary survey. On tight lots where fences are shared, an old fence may encroach a few inches. Without a survey, that becomes a neighbor dispute. We start with the line, not the post.
- Materials staged on the street. Corte Madera driveways are short and street parking is scarce, so a pallet dropped on the curb creates conflicts and possible fines. We plan staging in the driveway or a side yard from the start.
- Wildfire-interface materials on the hillside side. A fence a few blocks up the slope can face defensibility standards that a bayside fence never touches. Using the wrong material means tearing it out.
How Corte Madera’s Split Geography Changes Your Fence Project
This is the part a generic fence page will never tell you. Corte Madera is a small town squeezed between the bay and the Mount Tamalpais foothills, and Highway 101 splits the two. On the bayside flats, low-lying and tidal-influence parcels face flood-zone rules and finished-floor scrutiny. A few blocks up the rising hillside streets, wildfire defensibility and slope drainage govern the same project. Two neighboring fence jobs that look identical from the street can follow entirely different code paths – one pulled toward floodplain compliance, the other toward fire-hardening standards. Your fence permit, your material choice, and even how we stage the job all hinge on which side of the corridor your lot sits on. We ask about elevation and flood status before we quote because getting that wrong costs you time and money.
On a tight Corte Madera lot, the usual scenario goes like this: a homeowner wants to replace a fence that sits on or near a shared property line without sparking a dispute. The old fence was probably never surveyed and may encroach, so the fix starts with a boundary survey and a written party-wall agreement before any posts go in. A qualified local pro pulls the right permits – which may involve flood-zone or fire-hardening review – stages materials in the driveway because street parking is scarce, and keeps noise within town hours. Setting posts in concrete around Marin’s wet winters means scheduling excavation for the dry stretch.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Corte Madera, CA
Fence pricing in Corte Madera reflects the town’s density and the permit review that comes with it. A typical vinyl fence installation in Corte Madera runs $3,500-$9,000, and a typical aluminum fence installation runs $4,000-$10,000. Wood and privacy runs land in a similar band depending on length, height, and gate count. What moves the number most is your lot: a survey, a flood or fire-code review, tricky slope, or limited staging all add labor, and a shared boundary that needs a party-wall agreement adds coordination. We give you a written line-item quote, fixed pricing with no change orders, and the estimate is free. The written estimate sets the final price.
| Fence Type | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
We Also Serve Cities Near Corte Madera
Fencing work around southern Marin often crosses town lines, and we handle the neighboring communities the same way. If you’re in Larkspur, Mill Valley, Tamalpais-Homestead Valley, or Tiburon, we bring the same lot-by-lot approach to your project. Reach out and we’ll walk your property, talk materials, and give you a written quote. Those towns share the corridor but not always the same codes, so a local eye on your specific parcel matters.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Corte Madera
Most fence installations in Corte Madera do require a permit, and the requirements can differ depending on your lot. A bayside parcel in the flood zone may need FEMA floodplain review, while a hillside property may face wildfire defensibility standards. Two fences a few blocks apart can follow different code paths. We check your lot’s status and pull the right permits as part of the job. Call (877) 367-8617 for a free estimate.
Start with a boundary survey and a written party-wall agreement before any posts go in. On Corte Madera’s tight lots, the existing fence often sits on or near the line and may encroach, and a survey settles where the true boundary is. A written agreement with your neighbor keeps the replacement from turning into a dispute. We plan the work around that line from the outset. Call (877) 367-8617 to talk through your property line – estimates are free.
Yes, but the fence style and post method have to suit the grade. On the rising hillside streets, a fence runs on sloped terrain that can shift and drain water toward the structure, so posts need proper depth and the run needs to follow the contour rather than fight it. Flexible styles like chain link handle slope better than rigid panels, and drainage around the base matters. We’ll assess the slope during the estimate. Call (877) 367-8617 for a free quote.
The dry stretch of late spring through early fall is the easiest window, because Marin’s wet winters make excavation and post-setting slower. Digging in saturated soil is a poor start for any fence, so we schedule concrete work for the drier months. That said, we work year-round and plan around the rain. Call (877) 367-8617 to book your estimate and get on the schedule.
On a cramped lot, staging adds labor and planning, and that shows up in your quote. Corte Madera’s short driveways and scarce street parking mean materials have to be dropped in the driveway or a side yard, and a pallet on the curb creates conflicts and possible fines. We build staging into the quote upfront so there are no surprises. Call (877) 367-8617 for a free estimate – the written quote sets the final price.
Get Your Free Fence Estimate in Corte Madera
Whether you’re replacing a leaning privacy fence, putting up a new boundary line, or repairing what’s already there, the first step is an honest look at your lot. We’re licensed and insured, we give written line-item quotes with fixed pricing and no change orders, and every estimate is free. Our technicians have up to 11 years of experience working the kinds of constrained lots Corte Madera is known for. Call (877) 367-8617 for your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.