Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across San Bruno
If you live in San Bruno, you already know the fog rolls in low and stays. That steady moisture is hard on a wood fence, and it’s the reason a fence on a Crestmoor lot or a hillside lot below the hills needs more than a pretty panel and a shallow post. We connect San Bruno homeowners with independent local fencing professionals who understand this ground: small flat lots, tight property lines, and a real fire-risk edge on the western hillsides. Call (877) 367-8617 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why San Bruno Homeowners Call Construction Richmond for Fence Installation
Our technicians have up to 11 years of experience, and the professionals we connect you with work this stretch of the Peninsula often enough to know how a San Bruno job actually goes. Most lots here are post-WWII single-story stucco and wood-frame ranch homes on small flat parcels, and a fence install runs into the same realities again and again: original footings that were never deep, and property lines that haven’t been verified in decades. We put the property line first, not last, because that single step is where most of the trouble starts.
We work from the full-property view, which matters on a fence job. This company handles seven residential construction lines (driveway and pavers, fence installation, home additions and ADU, bathroom remodeling, windows and doors, roofing, and kitchen remodeling), so when a fence project reveals a grading or drainage problem along the property edge, there’s no chasing down a second contractor. We can connect you with the trade that handles it. You choose the material, we handle the build, and every estimate is written line by line. The written estimate sets the final price, and the initial estimate is free. When you’re ready for a number, call (877) 367-8617.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in San Bruno
The San Bruno lots we see tend to be tight, so the right material depends on what you’re fencing and where. Here’s how the most common jobs go.
Wood Fence
Wood is the classic choice on San Bruno’s ranch lots and still the most requested. On the fog-belt lots below the hills, we look hard at the post base first, because that’s where wood fences fail. Pressure-treated posts set with proper below-grade clearance last far longer than untreated posts buried in shallow dirt. Our fence installation team builds wood fences with the detailing a WUI-edge lot needs.

Privacy Fence
Small flat lots mean a six-foot privacy fence can enclose a whole backyard, giving you a real outdoor room rather than a borrowed view of the neighbor’s kitchen. Privacy fence work in San Bruno often runs into shared rails and existing shared fences in poor shape, so we check the line and the neighbor’s side before panels go up. If you’re replacing an old privacy fence, expect to address the footing, not just the pickets.

Fence Repair
Plenty of San Bruno fences look fine from the street while the posts are already soft at grade. Marine moisture feeds dry rot into untreated or soil-buried posts, and the pickets hold up long after the base gives out. Repair often means pulling the post and resetting a proper footing, which is why a repair estimate starts with a look at the base, not just the panels.

Aluminum Fence
Aluminum fencing makes sense where you want the line to read clean and stay low-maintenance, and it holds up well against damp summers. On hillside lots, an aluminum or iron line along the WUI edge needs the right detailing to be compliant. We source from brands like Jerith and ActiveYards so you have real choices in the grade and finish, not one take-it-or-leave-it option.
Trusted Brands We Service in San Bruno
For vinyl and aluminum fencing, we source from manufacturers like Bufftech, Barrette, ActiveYards, and Jerith. That means when you pick a vinyl privacy style or an aluminum picket, we’re working from a brand with a track record on the product and its finish, not a generic panel. We don’t stock parts locally or run trucks full of inventory, so material does get sourced to the job, but we handle ordering, timing, and coordination as part of the build. You choose the brand, we handle the rest.
Common Fence Installation Problems We See in San Bruno Homes
Most of the surprises we plan around are local. Here’s what turns up.
- Post bases rotted at grade while the pickets still look fine. Years of marine moisture feed dry rot into untreated or soil-buried posts, so the estimate you get from a quick look misses the footing replacement the job actually needs. We check the base before we price it.
- Property lines in Crestmoor are ambiguous. Rebuilt two-story lots sit beside untouched 1950s parcels with different original setbacks, so a fence installer who guesses the corner from the neighbor’s yard can be off. Every Crestmoor start gets its own line verification.
- Hillside WUI-edge lots get non-compliant fencing specified. A fence near the fire-risk edge needs defensible-space and setback rules checked, especially on ember-resistant detailing. Skipping that check means a redo after inspection sign-off fails.
- Old footings that were never deep enough. Post-war ranches on post-WWII slab-on-grade foundations often have fence footings that barely clear the dirt. We set pressure-treated posts into deeper footings with proper clearance.
Pricing for Fence Installation in San Bruno, CA
A typical vinyl fence installation in San Bruno runs $3,500 – $9,000, and a typical aluminum fence installation runs $4,000 – $10,000. Those ranges are estimates. What moves a number up or down is material grade, fence length, footing depth, gate framing, and whether the property line needs verifying. A short privacy run with good lines sits at the low end; a hillside lot with deep post settings and a load-bearing gate lands higher. We put the line items in writing, and the written estimate sets the final price.
| Fence service in San Bruno | Typical estimated range |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
Estimates are free. Call (877) 367-8617 to schedule yours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
See the difference
Before
After
Before
After
Before
AfterThe Crestmoor Reality: One Line, Two Different Eras
There’s a reason a fence bid in Crestmoor can’t be handled like a fence bid anywhere else. The neighborhood’s post-2010 replacement lots got rebuilt to modern codes after the 2010 PG&E pipeline explosion tore out an entire block of 1950s ranches. Today those new two-story homes stand directly against untouched 1950s originals, and the two sides have different original setbacks and different footing depths. A fence installer standing at that shared line cannot assume the neighbor’s yard tells the story of the property corner. It doesn’t. Every Crestmoor fence start needs its own survey and line verification, not a shared assumption carried down from the lot next door.
The same goes for the footing. The rebuilt lots were set to modern code; the originals next to them weren’t. Where the fence line crosses between them, the depth you can count on changes. We verify the line, check the corners, and only then set the scope in writing, so the panel spacing and footing depth match what’s actually there rather than what’s on an older drawing.
How a San Bruno Fence Job Usually Goes
On the fog-belt lots below the hills, the job lives or dies at two points: the post base and the property line. A qualified local pro pulls the fence line and checks the property corners before setting anything. Then the crew drops pressure-treated posts into deeper footings with proper below-grade clearance and secures the ember-resistant detailing a WUI-edge lot needs. The post setting and any load-bearing gate framing get written into the scope of work up front, so nothing gets added mid-job. Inspection sign-off comes before the panels go up, and that’s the point where a lot of DIY and under-scoped jobs fail. We write the scope to match, price it line by line, and any surprise is approved in writing before anyone touches it.
We Also Serve Cities Near San Bruno
We work the whole southern Peninsula around San Bruno, including Millbrae, South San Francisco, Daly City, and San Francisco. Each has its own line-verification quirks and lot lengths, and we bid each one on its own. If you’re just outside San Bruno and want our fence installation team to take a look, call (877) 367-8617.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in San Bruno
It changes because the property line and footing depth in Crestmoor can’t be assumed from the neighboring lot. Rebuilt 2010s replacement homes sit beside untouched 1950s originals with different original setbacks, so a quote that doesn’t verify the line up front often grows when the real corner and the real footing show up. We verify the line first and put allowances in the written contract so there are no mid-job surprises. Call (877) 367-8617 for a free estimate.
Most cities require a permit for a fence above a certain height, and San Bruno is no exception, so ask the city’s building department before you set a post. Inspectors commonly check post depth and footing on a permitted fence. We build the scope to pass inspection, and any change gets approved in writing before we touch it. Call (877) 367-8617 to get your project priced.
Vinyl and aluminum hold up best against San Bruno’s fog-belt moisture, while wood needs pressure-treated posts set with proper below-grade clearance to last. Marine moisture feeds dry rot into untreated or soil-buried posts, so the material choice matters less than how the base is set. Call (877) 367-8617 for a free estimate on either.
A straightforward San Bruno fence typically takes a few weeks from estimate to inspection sign-off, with the schedule driven by line verification, material lead time, and the city’s inspection window. Crestmoor and hillside lots take longer because the line survey and footing depth have to be confirmed first. Call (877) 367-8617 to schedule a free estimate and get a timeline for your lot.
Yes. A hillside lot below the WUI edge often has a fence the original builder left incomplete or non-compliant, and repair work there means checking defensible-space rules and ember-resistant detailing as well as the footer. We inspect the base and the line, price the repair line by line, and set any change in writing before work starts. Call (877) 367-8617 for a free estimate.
Get Your Free Fence Estimate in San Bruno
A fence should hold its line and its footing for a long time, and getting there in San Bruno means verifying the property corners, setting pressure-treated posts at the right depth, and matching the detailing to your lot. Whether you’re replacing a rotted privacy fence in Crestmoor, hardening the edge of a hillside lot below the hills, or starting fresh on a 94066 lot near Transit Village, we’ll put a written line-item quote in front of you and set the final price from there. Estimates are free, and we can work with any permitting the city requires. Call (877) 367-8617 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.