Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richmond Homeowners Choose ES Windows Construction
We provide independent ES Windows construction, repair and installation service in Richmond, CA. That means window and door work on ES Windows products done by contractors who understand vinyl and aluminum systems in the East Bay, and who tell you honestly whether a worn balance or foggy glass calls for a repair or a full replacement. We aren’t affiliated with, authorized by or sponsored by ES Windows – we work on their products based on field experience, not a dealer badge. If something on your window or door line has failed, call (877) 367-8617 and we’ll help you sort out what’s actually wrong.
Richmond’s housing stock gives us plenty to work with. Bungalows and shipyard-era cottages in South Richmond and the Iron Triangle often sit on framing that was never quite square to begin with, so window replacement here is frequently as much about correcting an opening as it is about setting a new unit. Fog-cooled summers with a persistent marine layer also mean these windows and doors live in a moisture-heavy climate, and that shapes how they age and how we approach them.
Why Trust Construction Richmond for Your ES Windows Construction?
Our technicians have up to 11 years of experience working on windows and doors, and that time is spent learning the specific quirks of each system rather than treating every window the same way. ES Windows vinyl and aluminum products each fail in their own patterns, and knowing those patterns saves you money. A balance shoe that’s worn out is not a reason to replace a whole window. Foggy glass between panes is not either. We diagnose the actual failure before we quote anything.
We use quality parts that fit ES Windows equipment. We don’t stock or carry OEM or genuine ES Windows parts, and we don’t claim to – we source replacement parts that match the fit and function of the original hardware. That keeps your service warranty-safe: we work with the window and door as it stands rather than modifying it in ways that could complicate a manufacturer’s coverage. We’re an independent provider, and we work on plenty of other window and door systems too, so we’re not going to push a replacement when a repair does the job. When it’s time for a full replacement, we handle it the same way: measure carefully, flash and seal correctly, and leave you with a window that operates as it should.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Richmond
These units have their own wear patterns, and most of what we see falls into a handful of categories. Here’s what tends to go first, and why.
- Vinyl frames that chalk, yellow or fade unevenly. UV light breaks down the surface of the extrusion over time, and a window on a sunny exposure shows it faster than one on the fog-cooled side of the house. It’s cosmetic most of the time, but on seriously degraded frames it can signal the extrusion itself is losing integrity – and that’s when replacement starts to make sense.
- Failed balance shoes and constant-force spiral balances. In single-hung and double-hung units, worn balances make the sash drift down, tilt, or refuse to stay open. It’s one of the most common complaints we hear, and it’s usually a hardware fix rather than a window replacement. The sash needs to be supported by a working balance, not by propping it open with a stick.
- Fogging, hazy glass or condensation between panes. That’s a failed seal on a dual-pane insulated glass unit. Once the seal is gone, moisture gets between the panes and the window can’t be cleaned back to clear. The glass can usually be re-glazed without changing the frame, which is far less disruptive and far less expensive than a whole-unit replacement.
- Compressed weatherstripping and blocked weep holes. Richmond’s fog and west-driven rain find every gap. Weatherstripping that’s flattened or compressed lets drafts in, and weep holes clogged with debris stop water from draining out of the track. Left alone, that trapped moisture shows up as condensation inside the track, water staining, and eventually rot at the sill.
- Screens and hardware that bind or come loose. Sliding patio doors and operable windows take a beating from daily use, and rollers, latches and screen frames wear out. Small parts, but they make a door feel like it’s failing when it isn’t.
ES Windows Parts & Our Repair-vs-Replace Approach
Here’s how a common scenario plays out. A vinyl single-hung unit won’t stay open, or a bedroom window has gone foggy between panes. The drift is a worn balance shoe; the fog is a failed IGU seal. A qualified pro checks the frame for square and cracking, replaces the balance or re-glazes the insulated unit when the frame itself is sound, and recommends full-frame replacement only when the extrusion or the rough opening is compromised – at which point the opening gets re-flashed and sealed correctly. That order of operations is the whole approach: match the part to the failure, fix what’s fixable, and replace only what’s genuinely at the end of its life.
We source quality parts that fit ES Windows equipment. We’re upfront that we don’t stock factory parts, but what we install is selected to fit and function correctly. Before any quote, we give you an honest assessment of which path makes sense. Call (877) 367-8617 for a free estimate and we’ll tell you straight.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place – frame condition, balance function, glass seal, weatherstripping and weep holes – and identify the actual failure rather than the symptom.
- 2
Repair or install. If hardware, glazing or weatherstripping is the issue, we repair in place with parts that fit. If it’s a full replacement, we measure the opening, check it for square, and set the new unit with proper flashing and sealing.
- 3
Test. We operate the window or door through its full range, check that sashes stay where you put them, confirm the slides track cleanly, and verify water drains through the weep system as it should.
- 4
Warranty. We walk you through what our work covers and what the product’s own coverage handles. We don’t make promises on the manufacturer’s behalf – we tell you what we can stand behind and what falls to them.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Richmond
We work on the range of ES Windows products you’re likely to have on a Richmond home: vinyl single-hung and double-hung replacement windows, vinyl sliding patio doors, aluminum series windows and sliding glass doors, and garden, awning and fixed picture units. Single-hung and double-hung units are where balance and sash problems show up. Sliding patio doors are where rollers, tracks and weatherstripping wear. Aluminum series and fixed or picture units are typically where glazing seal failure and frame oxidation draw attention. Whatever’s on your house, we can assess it, repair it or replace it. We don’t describe models or series – we work with the unit in front of us.
We Also Service These Brands
Windows and doors are one piece of a bigger picture. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, among the 50-plus brands we source from. That matters when you’re planning a window replacement alongside a kitchen or bath project: one contractor, one set of sequencing decisions, and finishes that don’t get compromised because a different trade got there first.
FAQs – ES Windows Construction Service in Richmond
No. We are an independent ES Windows service provider. We are not affiliated with, authorized by or sponsored by ES Windows, and we’re not a dealer. We diagnose and repair or replace their products based on field experience with how these units age in the East Bay.
Yes. We source parts that match the fit and function of the original hardware, including balances, rollers, weatherstripping and glazing for insulated units. We don’t stock or carry OEM or genuine ES Windows parts and we don’t claim to – what we install is selected to work correctly with your unit.
Most repairs – a balance replacement, a weatherstripping fix, hardware adjustment – can be handled in a single visit. Insulated glass re-glazing and full-unit replacement take longer because the glass or unit has to be ordered and the opening prepped. The written estimate sets the timeline for your specific work.
We cover vinyl single-hung and double-hung replacement windows, vinyl sliding patio doors, aluminum series windows and sliding glass doors, and garden, awning and fixed picture units. That includes repair, re-glazing and full replacement.
Proper repair and replacement work generally doesn’t void manufacturer coverage, but the terms are set by ES Windows, not by us. We work in a warranty-safe way and are upfront about which items fall under the manufacturer’s coverage and which fall under ours. If you have the original documentation, keep it handy.
Window replacement in Richmond typically runs $4,500 – $15,000, and small repairs come in well below that. Here are the typical estimated ranges for the work we do alongside window projects:
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
These are typical estimates, not a quote. The written estimate sets the final price for your job. Call (877) 367-8617 for an exact quote – estimates are free.
Book Your ES Windows Service in Richmond, CA
Whether it’s a balance that’s given out, foggy glass that needs re-glazing, or a full window replacement that has to line up with a kitchen or bath remodel, we’ll give you a straight assessment and a free written estimate. One contractor handles the window work and the interior finishes, so the sequencing stays right. Call (877) 367-8617. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.