Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richmond Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Richmond, CA, for owners of factory-built modular homes, prefab ADUs, and panelized structures. What sets our Dvele work apart is that we plan every remodel and repair around how the home was actually assembled: module seams, enclosed mechanical chases, and factory-finished surfaces. A Dvele home is built in a factory and set on site, so it does not behave like a stick-built house during a kitchen remodel, a bathroom gut, or a roof replacement.
We’re an independent service provider. We’re not affiliated with, authorized by, or a dealer for Dvele, and we don’t claim to be factory-trained or certified by them. We repair, install, and service Dvele structures using quality parts that fit them, and our technicians bring up to 11 years of experience to the work.
Richmond is full of homes that were never engineered for permanence, and Dvele’s modular stock sits right alongside that mix. If you own one and want a realistic plan, call (877) 367-8617 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Richmond for Your Dvele Construction?
Dvele homes are built off-site as finished modules. That means closed wall cavities, pre-hung systems, and factory-applied finishes arrive on site already sealed. A remodel inside one is a different discipline than a remodel in a 1920s Iron Triangle cottage. Our technicians have learned to read the assembly before they touch it. They map panel seams, locate the mechanical core, and identify which walls are structural to the module versus which are finish only. That step alone prevents most of the surprise change-orders that hit Dvele owners mid-project.
We also work with quality parts that fit Dvele equipment, matching panel profiles, trim, and finishes at the seams rather than forcing stock components into a factory opening. Where factory parts aren’t practical to source, quality aftermarket materials for kitchens, baths, and roofing fill the gap without compromising how the home performs.
Warranty-safe service matters here. We don’t cut into enclosed chases or modify the modular frame without documenting what changes and why, so nothing we do quietly compromises the home’s original envelope or systems. You choose the brand for the finishes; we handle the build around the factory architecture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Richmond
Prefab homes fail in predictable ways, and most of them trace back to the fact that two factory buildings meet on a moving foundation. Here’s what we see most often in Richmond.
- Hairline cracks and paint ridges along module joints. Where two modules marry, there’s always some relative movement between them. Over time that shows up as a straight, thin crack that runs up a wall or across a ceiling exactly along the factory marriage line. It’s rarely structural. It’s the finish coat giving at the seam.
- Seam telegraphing around door openings. Factory-applied finishes tend to telegraph at wall and ceiling panel joints, especially where modules meet over a doorway. The drywall tape or the paint film follows the panel edge and you see a faint ridge. Left alone during a remodel, that ridge reappears after repainting unless the seam is properly addressed.
- Enclosed mechanical and electrical chases. Wiring and plumbing are routed through panel cavities at the factory, so the chase is closed once the module ships. Snaking a new circuit or moving a fixture becomes a real puzzle. It’s one of the most common reasons a Dvele kitchen or bath remodel needs a scope adjustment before demolition starts.
- Moisture at module joints and roof step-outs. The joint where a prefab seam meets a site-built deck, addition, or roof plane is where flashing details matter most. Richmond’s fog-cooled climate, with a persistent marine layer and wind-driven rain from the west, puts steady moisture pressure on those transitions. Small failures there become rot and interior staining if they aren’t caught.
- Roof transitions that don’t match conventional framing. Dvele roofs carry prefab seam and flashing layouts that don’t read like a stick-built roof. A roofer who treats it as standard can create a leak at the very transition they were hired to fix. The layout has to be understood before any tear-off.
Richmond’s older building stock adds to the complexity. In the flatlands near the old shipyards, footing work routinely hits buried debris and undocumented fill, and unpermitted additions are common enough that we budget for plan-check corrections on almost any renovation. When a Dvele home sits next to a cottage that came out of the WWII-era shipyard boom, the two are usually tied together in ways nobody documented.
Dvele Parts & Our Repair-vs-Replace Approach
For a Dvele home, parts sourcing is a blend. We use factory-spec components where they exist and make sense: matching panel profiles, trim, and finishes at module seams where an exact color and shape keeps the wall reading as one surface. For kitchens, baths, and roofing, quality aftermarket materials usually do the job better and faster than chasing a factory part that isn’t practical to source. We don’t stock or order OEM Dvele parts, and we don’t claim to. We fit quality parts to Dvele equipment.
The repair-versus-replace call follows the same logic. Seam and envelope issues are almost always a repair-first situation: re-taping a joint, reinforcing a substrate, re-flashing a transition. Wholesale replacement only makes sense when an addition or a remodel genuinely requires reconfiguring the modular envelope itself. That’s a different conversation, and we’ll walk you through it with a written line-item estimate before anything starts.
Call (877) 367-8617 to talk through your Dvele repair and get a free estimate.
Our Dvele Service Process – Step by Step
How a Dvele project actually runs, from first look to close-out:
- 1
Diagnosis. We read the assembly before we plan the scope. That means mapping panel seams, locating the mechanical core and enclosed chases, and identifying where modules meet each other and the site-built portions. On a roof call, we trace the prefab seam and flashing layout first.
- 2
Repair or install. For seam and envelope work, we open the finish carefully along the joint, reinforce the substrate as needed, and re-finish so the wall reads clean. For a kitchen or bath, we reframe and shore surfaces so cabinets, tile, and fixtures land on stable ground, not on a moving seam. Install work follows the factory interfaces rather than cutting through them.
- 3
Test. Water, weather, and systems get checked before we call it done. Roof and envelope transitions get a real look at the flashing detail, not just a visual once-over. Electrical and plumbing changes get tested against the chase routing.
- 4
Warranty and close-out. We document what changed and why, so the record of any modification to the modular envelope or chases is clear. That documentation protects you if a warranty question ever comes up.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Richmond
We work on the Dvele product types Richmond owners actually have. That includes the fully modular single-family home, with its factory-built module stacks and mechanical cores. It includes Dvele prefab ADU modules, which are popular here as second units on larger lots. We also service Dvele custom-configuration modular homes with integrated solar and battery systems, and Dvele high-performance panelized envelope systems for accessory and primary structures.
The three sub-services we handle most on Dvele homes are full kitchen remodeling, bathroom remodeling, and roof replacement and installation. Each one has to respect how the home was built. We don’t claim to stock Dvele products, and we don’t sell them. We repair, install, and service them.
We Also Service These Brands
Dvele expertise is one piece of what we do. We also source and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, alongside more than 50 recognized national brands across roofing, windows, doors, fencing, pavers, and prefab ADU systems. That multi-brand bench means your Dvele kitchen or bath remodel isn’t limited to one specification. You choose the brand; we handle the build around the factory architecture.
FAQs – Dvele Construction Service in Richmond
Is Construction Richmond authorized by Dvele?
No. We’re an independent Dvele service provider. We’re not affiliated with, authorized by, or a dealer for Dvele, and we don’t claim factory training or certification. We repair, install, and service Dvele structures using quality parts that fit them.
Do you use quality parts that fit Dvele equipment?
Yes. We blend factory-spec components for seams, trim, and finishes with quality aftermarket materials for kitchens, baths, and roofing where factory parts aren’t practical to source. We don’t stock or order OEM Dvele parts. We fit quality parts to how the home was actually assembled.
How long does Dvele service take?
It depends on the scope. A seam repair or a targeted roof fix is usually a short job. A kitchen or bathroom remodel in a Dvele home runs longer because the scope has to account for mapping the panel seams and enclosed chases before demolition. We set the timeline in the written estimate, and the estimate sets the final price. Call (877) 367-8617 for a free estimate.
What kinds of Dvele products do you cover?
We service Dvele modular single-family homes, prefab ADU modules, custom-configuration modular homes with integrated solar and battery systems, and panelized envelope systems. Our focus within those is kitchen remodeling, bathroom remodeling, and roof replacement and installation.
Will service void my Dvele warranty?
Not if the work is done with care around the modular envelope and chases. We document what changes and why, so nothing we do quietly compromises the home’s original systems. We can’t speak for Dvele’s warranty terms, so check those directly. What we control is doing the work in a way that respects the assembly and keeps a clear record.
How much does Dvele construction cost in Richmond?
Typical estimated ranges are below. These are estimates; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (877) 367-8617 for an exact quote. Estimates are free.
Book Your Dvele Service in Richmond, CA
If you own a Dvele home in Richmond and want a construction partner who plans around how it was built, we’re ready. Call (877) 367-8617 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richmond.