Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richmond Homeowners Choose PGT Construction
We provide independent PGT window and door service as part of full kitchen, bathroom and roofing projects in Richmond. PGT is a window and door manufacturer, not a remodeling contractor, so PGT work here means the window and door openings around the scopes you actually hire for: a kitchen remodel that has to fit an existing slider, a bathroom rebuild around a fixed impact window, a roof replacement that has to re-flash every frame it touches. What sets our PGT work apart is that we read the frame profile, the sash balance and the hardware on what’s already in your wall before we plan the remodel around it. We are an independent service provider. We are not affiliated with, authorized by or partnered with PGT, and we make no claim of manufacturer endorsement. Our technicians have up to 11 years of experience with these units. Call (877) 367-8617.
Why Trust Construction Richmond for Your PGT Construction?
PGT windows and doors are engineered assemblies. The balances are load-matched to the sash weight, the rollers are sized to the panel, and the glazing beads are cut to a specific profile. Get any of those wrong and the unit misbehaves in ways that look like a manufacturing defect when they’re really an installation or parts problem. Our technicians have up to 11 years of experience identifying the actual profile and glass type on an existing PGT installation, sourcing a balance or roller set that matches it, and doing the work in a way that doesn’t compromise the unit.
That matters most on warranty. PGT’s coverage follows the product, and the fastest way to complicate a claim is a mismatched balance that loads the sash wrong, a bead pried out with the wrong tool, or a sill that gets re-sealed with the wrong material. We work warranty-safe: we don’t drill through frames to fake a fix, we don’t swap in hardware that changes how the sash sits, and we document what we found so you can talk to the manufacturer yourself if a defect claim is warranted. We’ll also tell you plainly when a problem isn’t the window at all, which in Richmond is more often than you’d think. Call (877) 367-8617 to talk through what you’re seeing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Richmond
These are the failures we run into most on PGT units in Richmond, and the reasons behind each one.
- Failed sash balances and pivot shoes on vinyl single-hung and double-hung units. The sash won’t stay up, or it tilts out of the jamb when you try to clean the outside glass. Coil and block-and-tackle balances lose tension over years of use, and pivot shoes crack at the jamb when they do. The window isn’t worn out. The balance is.
- Seal failure and interlayer haze on laminated impact glass. WinGuard panels that face west or south take the most wind-driven rain and the most marine moisture, and that’s where you’ll first see fogging between the panes or a milky haze in the interlayer. The seal around the edge of a laminated unit fails before the glass itself does.
- Aluminum slider rollers, tracks and corner seals. The panel drags, jumps the track, or seeps at the sill after a wet winter. Rollers flatten under the panel weight, the track fills with grit and salt film, and the corner seal at the sill degrades. Left alone, water gets into the wall below the door.
- Condensation and water intrusion at the frame-to-opening flashing. This is the one homeowners misdiagnose most. The window isn’t leaking. The transition between the frame and the stucco, siding or roofing is. When the original install didn’t integrate the flashing properly, Richmond’s wind-driven rain from the west finds that gap and works its way in. Water shows up on the interior trim and everyone blames PGT.
- Hardware and screen wear on casement and slider units. Cranks strip, hinges loosen, screens bend out of frame. These are small parts with a real job, and using a generic replacement that doesn’t match the operator changes how the sash seats against the weatherstripping.
The pattern behind all of these is the same. PGT units are sound. What fails is the wear parts and the weatherproofing details around them, and both are serviceable. Call (877) 367-8617 to describe the symptom.
PGT Parts & Our Repair-vs-Replace Approach
We use genuine PGT replacement balances, rollers, screens and glazing beads where the profile is still supported. Where an OEM part is discontinued or back-ordered, we match aftermarket hardware to the load the sash actually puts on it. What we won’t do is drop in a balance that’s close enough. A mismatched balance loads the sash wrong, the window never sits right again, and you’ve spent money to make the problem worse.
Repair or replace comes down to the frame. If the frame, sill and nailing fin are sound, hardware and glass service is the honest call, and it’s usually the cheaper one. If the frame is rotted, the fin is compromised behind the siding, or the flashing failure has been letting water in for years, replacement usually costs less over time than chasing one repair after another. We’ll show you what we’re seeing and let you decide. Want an opinion on yours? Call (877) 367-8617.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT profile, the glass type (laminated impact versus standard insulated), and the age of the installation. We test the balance tension, check the rollers and track, inspect the glazing beads, and probe the frame-to-opening transition from the exterior. On a remodel, we do this before demo so the opening can be planned into the new scope instead of discovered mid-job.
- 2
Repair or install. On existing units, we replace the failed balance, shoe, roller or seal with a matched part and reset the sash or panel to factory geometry. On new installations inside a kitchen, bath or roof project, we set the frame square, integrate the flashing with the stucco, siding or roofing assembly, and check that the rough opening dimensions suit the unit.
- 3
Test. We operate every sash and panel through its full range, check that it latches, locks and drains, and water-test the sill and perimeter transitions where a leak was called in. You see it work before we pack up.
- 4
Warranty and documentation. We hand over what was replaced, which parts were used, and what the manufacturer should know if a defect claim applies. Nothing gets buried in a wall.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Richmond
We work on the PGT window and door types you’ll actually find in Richmond homes. That includes PGT WinGuard Aluminum single-hung and horizontal slider windows, PGT WinGuard Vinyl single-hung and casement windows, PGT Aluminum Series sliding glass doors, and PGT Vinyl Series double-hung and slider windows. The impact-rated WinGuard lines come up most often on remodels where the opening has to meet a storm or security requirement, while the Vinyl Series units show up in the older bungalows and cottages across South Richmond and the Iron Triangle. We service existing installations and coordinate new ones into kitchen, bathroom and roofing scopes. If you’re unsure which line you have, the label on the glass or the frame usually tells us.
We Also Service These Brands
PGT is one brand among many on a full-property project, and we’re not locked into a single line. Our work spans KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler, Toto, Grohe and Moen fixtures, along with roofing from GAF, CertainTeed and Owens Corning and impact windows and doors from CGI and ECO Window Systems. You choose the brand. We handle the build.
FAQs – PGT Construction Service in Richmond
Is Construction Richmond authorized by PGT? No. We are an independent service provider with no affiliation, partnership or authorization from PGT, and we don’t claim to be a dealer. We repair, install and service PGT windows and doors with quality parts that fit them, and we’ll tell you if a manufacturer warranty claim is the better route. Call (877) 367-8617 to talk it through.
Can you get PGT parts for a window that’s already in my Richmond house? Usually yes. We source genuine PGT replacement balances, rollers, screens and glazing beads where the profile is still supported, and matched aftermarket hardware where the OEM part is discontinued or back-ordered. We match the part to the sash load, never just to the size. Tell us what’s happening and we’ll tell you what’s likely available. Call (877) 367-8617.
My WinGuard slider is hazy between the panes – is that a PGT defect or just age? It’s usually seal failure in the laminated unit rather than misuse, and it’s more common on west- and south-facing panels that take the most wind-driven rain and marine moisture. Haze in the interlayer itself points to delamination. Either way, the panel has to be evaluated in person, and if it’s within the covered period a defect claim may apply. Call (877) 367-8617 so we can look at it.
The window over my kitchen sink won’t stay up. Does the whole window need replacing? Almost never. A vinyl single-hung that won’t stay open is usually a failed balance or a cracked pivot shoe, and both are replaceable with the frame left in the wall. The whole unit only makes sense when the frame is compromised. This is the most common PGT call we get. Call (877) 367-8617 for a look before you price a full window.
I’m remodeling a bathroom around an existing PGT window. What should the contractor check first? Check the frame-to-opening flashing and the glass type before anything gets tiled. If the original install didn’t integrate with the stucco or siding, water gets in behind the new tile and you’ll never see the source. Confirm the unit is laminated impact or standard insulated, because shower moisture in a fog-cooled Richmond bathroom behaves differently around each. We scope that before demo. Call (877) 367-8617.
How much does PGT construction cost in Richmond? There’s no single number, because PGT work usually rides inside a larger project. Typical estimated ranges for the scopes that involve window and door openings are below. These are estimates only; the written estimate sets the final price.
| Scope | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
Call (877) 367-8617 for an exact quote. Estimates are free.
Book Your PGT Service in Richmond, CA
Whether a balance has failed over the kitchen sink or you’re planning a full kitchen, bathroom or roof scope around existing PGT windows and doors, we can help you sort out what’s actually wrong and what the fix costs. Call (877) 367-8617. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate.
Written by the team at Construction Richmond.